Maintain your Solar Panels in Florida


Are Solar Panels easily damaged?

A solar power system's largest chunk of investment is the panels. Thus, it is very important that the item lasts as long as possible since the value for the money depends upon that. Solar panel manufacturers take this into account when making their products.

Thus, solar panels are generally not easy to damage and shouldn't be compromised much by a tiny impact. In addition to standing up to hail and small branches, solar panels can also withstand dust and dirt on the surface. Solar panels can even be stepped on if they have a good frame that supports them evenly from every corner.

Do Solar Panels need maintenance?

If you tilt your panels, you're in luck: If debris accumulates on them, rainfall will actually wash it away. For extended periods without rain or during the dry season, they should be manually cleaned. Two to four times per year is generally recommended to clean your solar panels. You don't need to put much effort into this, which is good news. It takes very little effort to clean your panels, all you need is a leaf blower and garden hose.

How often do Solar Panels get damaged?

Solar panels do occasionally break, but not in the way you might think. A physically broken solar panel is pretty unlikely because solar panels are designed to withstand some pretty harsh weather conditions.

A solar panel has a lifespan of approximately 20 to 30 years when it reaches the end of its useful life and cannot produce electricity. Each solar panel can degrade by five percent each year.


Can a Broken Solar Panel Work?

Solar panels are robust enough to withstand a lot of impact. But the surface is fragile because of tempered glass. The question is, are solar panels sturdy enough to walk on? Can you still use a panel that is broken? Suppose it works, what kind of results can be expected? Now let's see what happens!

Recognize what is broken

The glass and frame of a solar panel are sandwiched between three layers: Encapsulant, Crystalline cells, and Backsheet. In the Crystalline cells, the sunlight's photons are trapped and used to produce current. A solar panel has multiple Crystalline cells, and each works independently.

When an impact occurs, the upper layer of glass is usually broken. It's still producing current from the Crystalline cells under the broken glass, so they're still doing their job. Crystalline cells, however, will stop producing voltage if they get damaged.

The cells beneath the surface may degrade

The glass on the panel may look broken now, and you may think that you can leave it there. This can't just be left in the open to deteriorate. The crystalline cells must be covered. The panels will not just pop off if they are tempered, because they will not completely break. The pattern of the cells will be broken like a car window, with an opening to each one.

Every time it rains or accumulates dust and dirt, it will certainly get inside the crystalline cells and begin to degrade them. You will get less current if the crystalline cells degrade. If you want your broken panel to provide you with a long service, you must attempt to repair it once you notice a crack or impact.

The panel needs to be repaired

In the case of a broken panel with broken glass and intact cells, the panel can be repaired and used. Glass has to be repaired with epoxy resin, a bowl that you can mix it in, and something to push the resin onto the glass. It is important that the epoxy you purchase is water-resistant and will not fade in direct sunlight. Clean the panel thoroughly before you begin repairing it. Remove the panel from the frame and lay it on a flat surface.

Spread epoxy resin from edge to edge on the surface after mixing epoxy resin in a bowl. Ensure that it's evenly spread and keep it dust-free; after application, allow it to dry. To make it even more strong, you can apply three or four additional coats once the epoxy is completely dry on the surface. Make sure the panel is in good condition before beginning the repair project and again once it is completed.


Cleaning and Maintenance Tips for Solar Panels

The durability of solar panels allows them to withstand harsh weather conditions for decades with little damage. The panels must, however, be well taken care of to ensure that they last for a long time in good condition. To ensure that your panels serve you to the fullest potential, here are some tips you should know:

You can monitor the performance of your solar system by making sure the voltage is correct and the potential is being fully utilized. Inverters with green lights mean that the solar system is compensating your energy bills. Whilst checking the inverter, you should see that the light is green.

Ensure the panel is maintained properly on a daily basis by documenting its performance. Make sure you make a note of how much energy is generated every day at the same time and on days with a lot of clouds. There will be inconsistencies in some of the results. You can choose from a variety of monitoring systems provided by your manufacturer.

It is imperative that you maintain the panels regularly so they do not build up dust or dirt. You should make sure that the joints do not corrode or rust over time. If they do, the aging system will be weaker.

It is ideal to place your solar panels away from trees so they can get as much sun as possible. The best way to set them up is on your roof so that you can keep the sunlight from obscuring the path.

Make sure panels are clean and sunlight can reach all parts of the panel. Use soapy water and a soft sponge to scrub the panels. As a result, they cannot produce current if they're not exposed to the full volume of sunlight.

In the event that you cannot regularly clean your solar panels, an automatic cleaning mechanism can be installed. Automatic cleaners, also known as robotic cleaners, use sprinklers and wipers to clean.

For more on cleaning solar panels click here